====== Cover calibrator Tool ======

This tool allow to open/close the cover and light the flat calibrator.\\
The calibrator section is not visible if the device include only a cover without the calibrator light.\\
Similarly a flat panel not attached to a cover do not show the cover section.

{{:en:documentation:tool_cover1.png|}}

The light are green when the telescope is ready for imaging with the cover open and light off.\\
Click the **Open** / **Close** button to change the cover status.

When the cover is closed it is possible to check **Light** and set the desired brightness.\\
Some devices do not change the brightness instantly, Wait the light change to yellow to indicate the ready status.

{{:en:documentation:tool_cover2.png|}}

Uncheck **Light** to stop the light and keep the cover closed, or click **Open** to stop the light and open the cover.