2018-10-10T01:06:04.275  CCDciel Version beta 0.9.43-1169-181be43 2018/10/09 22:02:33
2018-10-10T01:06:04.275  Compiled with: Lazarus 1.8.4.0 Free Pascal 3.0.4 Linux-x86_64-gtk2
2018-10-10T01:06:04.276 1: CCDciel Version beta 0.9.43-1169-181be43 initialized
2018-10-10T01:06:04.276 3: Using configuration file ccdciel_CA300-ASI183.conf
2018-10-10T01:06:17.286 2: Connecting Camera...
2018-10-10T01:06:17.294 2: Connecting Filter wheel...
2018-10-10T01:06:17.301 2: Connecting Focuser...
2018-10-10T01:06:20.600 1: Camera connected
2018-10-10T01:06:21.787 2: Camera frame x=0 y=0 width=5496 height=3672
2018-10-10T01:06:21.789 2: Camera cooler : True
2018-10-10T01:06:22.639 3: ZWO CCD ASI183MM Pro: Set temperature -20.0
2018-10-10T01:06:24.728 3: ZWO CCD ASI183MM Pro: Set temperature -20.0
2018-10-10T01:06:25.769 3: ZWO CCD ASI183MM Pro: Set temperature -20.0
2018-10-10T01:06:26.593 1: Filter wheel connected
2018-10-10T01:06:26.833 3: ZWO CCD ASI183MM Pro: Set temperature -20.0
2018-10-10T01:06:26.952 1: Cannot connect to CdC, Is CdC running and the server active?
2018-10-10T01:06:26.953 1: Connection refused
2018-10-10T01:06:26.958 1: Planetarium: Cartes du Ciel disconnected
2018-10-10T01:06:26.967 1: Focuser connected
2018-10-10T01:06:28.028 1: Autoguider: Connecting
2018-10-10T01:06:28.036 2: Autoguider: Calibrating
2018-10-10T01:06:40.707 2: Autoguider: Calibration Complete
2018-10-10T01:06:40.709 2: Autoguider: Lock Position Set
2018-10-10T01:06:40.721 2: Autoguider: Start Guiding
2018-10-10T01:06:42.447 2: Autoguider: Guiding
2018-10-10T01:07:47.164 2: Set Binning 4x4
2018-10-10T01:07:47.164 3: ZWO CCD ASI183MM Pro: Set binning 4x4
2018-10-10T01:07:47.378 2: Start single preview
2018-10-10T01:07:51.026 2: End preview
2018-10-10T01:08:11.521 2: Start single preview
2018-10-10T01:08:20.458 1: Planetarium is not connected
2018-10-10T01:08:24.766 1: Planetarium: Cartes du Ciel connected
2018-10-10T01:08:28.955 2: Cannot find approximate coordinates for this image.
The astrometry resolution may take a very long time.
2018-10-10T01:08:28.956 3: Resolving using Astrometry.Net ...
2018-10-10T01:08:32.889 2: End preview
2018-10-10T01:08:34.655 2: Autoguider: Stopped
2018-10-10T01:08:34.908 2: Autoguider: Exposures Stopped
2018-10-10T01:08:36.447 2: Open file /home/starhopper/.config/ccdciel/tmp/ccdcielsolved.fits
2018-10-10T01:08:36.447 2: Astrometry.Net resolve successful. Solved in 7 seconds
2018-10-10T01:08:39.446 1: CCD frame sent to planetarium.
2018-10-10T01:09:11.142 2: Start single preview
2018-10-10T01:09:32.535 2: End preview
2018-10-10T01:10:53.568 2: Start single preview
2018-10-10T01:10:59.842 2: Autoguider: Lock Position Set
2018-10-10T01:10:59.847 2: Autoguider: Star Selected
2018-10-10T01:11:05.097 2: Autoguider: Lock Position Set
2018-10-10T01:11:05.132 2: Autoguider: Start Guiding
2018-10-10T01:11:06.862 2: Autoguider: Guiding
2018-10-10T01:11:54.955 2: End preview
2018-10-10T01:15:13.900 1: Starting sequence lgs3
2018-10-10T01:15:13.915 1: Initialize target lgs3
2018-10-10T01:15:13.917 1: Object lgs3, start plan LRGB4m
2018-10-10T01:15:18.994 1: Start step L4m
2018-10-10T01:15:18.995 2: Start capture
2018-10-10T01:15:18.995 2: Set Binning 1x1
2018-10-10T01:15:18.995 3: ZWO CCD ASI183MM Pro: Set binning 1x1
2018-10-10T01:15:19.237 1: Autofocus now
2018-10-10T01:15:19.237 2: Stay at the current position for autofocus
2018-10-10T01:15:19.237 2: Pause autoguider
2018-10-10T01:15:19.560 2: Autoguider: Paused
2018-10-10T01:15:21.333 2: Focuser temperature: 20.0
2018-10-10T01:15:21.335 3: ZWO CCD ASI183MM Pro: Set binning 2x2
2018-10-10T01:15:21.647 3: Take control exposure for 2.0 seconds
2018-10-10T01:15:36.904 2: Autofocus start Dynamic curve
2018-10-10T01:15:36.905 2: Focuser temperature: 20.0
2018-10-10T01:15:36.905 2: AutoFocus started, initial position: 9642
2018-10-10T01:15:42.731 3: Using median of 29 stars
2018-10-10T01:15:44.156 3: Autofocus running, hfd=3.0 peak:64795.7 snr:1378.5
2018-10-10T01:15:44.158 3: MoonLite: Focuser move to 9483 - 100 Backlash compensation
2018-10-10T01:15:47.306 3: MoonLite: Focuser move to 9483
2018-10-10T01:15:56.291 3: Using median of 23 stars
2018-10-10T01:15:57.604 3: Autofocus running, hfd=5.4 peak:34702.8 snr:721.0
2018-10-10T01:15:57.604 3: MoonLite: Focuser move to 9536
2018-10-10T01:16:06.375 3: Using median of 29 stars
2018-10-10T01:16:07.693 3: Autofocus running, hfd=4.0 peak:51508.6 snr:1403.6
2018-10-10T01:16:07.693 3: MoonLite: Focuser move to 9589
2018-10-10T01:16:16.372 3: Using median of 27 stars
2018-10-10T01:16:17.693 3: Autofocus running, hfd=3.2 peak:64732.6 snr:1376.7
2018-10-10T01:16:17.693 3: MoonLite: Focuser move to 9642
2018-10-10T01:16:26.544 3: Using median of 25 stars
2018-10-10T01:16:27.857 3: Autofocus running, hfd=3.2 peak:64855.9 snr:1375.7
2018-10-10T01:16:27.857 3: MoonLite: Focuser move to 9695
2018-10-10T01:16:36.573 3: Using median of 26 stars
2018-10-10T01:16:37.905 3: Autofocus running, hfd=3.9 peak:57697.7 snr:1311.9
2018-10-10T01:16:37.905 3: MoonLite: Focuser move to 9748
2018-10-10T01:16:46.570 3: Using median of 21 stars
2018-10-10T01:16:47.884 3: Autofocus running, hfd=5.7 peak:28279.6 snr:625.2
2018-10-10T01:16:47.884 3: MoonLite: Focuser move to 9801
2018-10-10T01:16:56.819 3: Using median of 17 stars
2018-10-10T01:16:58.136 3: Autofocus running, hfd=7.3 peak:21313.7 snr:398.1
2018-10-10T01:16:58.282 3: HYPERBOLA curve fitting focus at 3.466,  remaining curve fit error 0.0682,  iteration cycles 7
2018-10-10T01:16:58.283 3: MoonLite: Focuser move to 9561 - 100 Backlash compensation
2018-10-10T01:17:02.180 3: MoonLite: Focuser move to 9561
2018-10-10T01:17:05.334 3: MoonLite: Focuser move to 9614
2018-10-10T01:17:13.891 3: Using median of 24 stars
2018-10-10T01:17:15.211 2: Autofocus finished, POS=9614 HFD=3.1 PEAK:64791.6 SNR:1254.9 TEMP:20.0
2018-10-10T01:17:15.212 3: ZWO CCD ASI183MM Pro: Set binning 1x1
2018-10-10T01:17:15.436 1: AutoFocus successful
2018-10-10T01:17:15.436 2: End preview
2018-10-10T01:17:15.436 2: Resume autoguider
2018-10-10T01:17:15.749 2: Autoguider: Resumed
2018-10-10T01:17:19.096 2: Autoguider: Guiding
2018-10-10T01:17:22.638 1: Starting Light exposure 1 for 240 seconds
2018-10-10T01:21:33.477 1: Saved file /home/starhopper/CCD/lgs3/Light/lgs3_L_53_240s_20181009_232133.fits
2018-10-10T01:21:38.399 1: Dithering...
2018-10-10T01:21:38.400 9: Enter dithering wait loop,  FDithering=True terminated=False CancelAutofocus=False FStopGuiding=False
2018-10-10T01:21:38.518 2: Autoguider: Guiding Dithered
2018-10-10T01:21:39.848 2: Autoguider: Settling
2018-10-10T01:21:48.890 2: Autoguider: Guiding
2018-10-10T01:21:48.910 9: Exit dithering wait loop,  FDithering=False terminated=False CancelAutofocus=False FStopGuiding=False
2018-10-10T01:21:49.923 1: Starting Light exposure 2 for 240 seconds
2018-10-10T01:26:00.367 1: Saved file /home/starhopper/CCD/lgs3/Light/lgs3_L_53_240s_20181009_232600.fits
2018-10-10T01:26:05.202 1: Dithering...
2018-10-10T01:26:05.203 9: Enter dithering wait loop,  FDithering=True terminated=False CancelAutofocus=False FStopGuiding=False
2018-10-10T01:26:05.325 2: Autoguider: Guiding Dithered
2018-10-10T01:26:06.853 2: Autoguider: Settling
2018-10-10T01:26:17.332 2: Autoguider: Guiding
2018-10-10T01:26:17.345 9: Exit dithering wait loop,  FDithering=False terminated=False CancelAutofocus=False FStopGuiding=False
2018-10-10T01:26:18.359 1: Starting Light exposure 3 for 240 seconds
2018-10-10T01:30:29.196 1: Saved file /home/starhopper/CCD/lgs3/Light/lgs3_L_53_240s_20181009_233028.fits
2018-10-10T01:30:34.031 1: Dithering...
2018-10-10T01:30:34.031 9: Enter dithering wait loop,  FDithering=True terminated=False CancelAutofocus=False FStopGuiding=False
2018-10-10T01:30:34.147 2: Autoguider: Guiding Dithered
2018-10-10T01:30:35.371 2: Autoguider: Settling
2018-10-10T01:30:50.321 2: Autoguider: Guiding
2018-10-10T01:30:50.332 9: Exit dithering wait loop,  FDithering=False terminated=False CancelAutofocus=False FStopGuiding=False
2018-10-10T01:30:51.345 1: Starting Light exposure 4 for 240 seconds
2018-10-10T01:35:02.195 1: Saved file /home/starhopper/CCD/lgs3/Light/lgs3_L_53_240s_20181009_233501.fits
2018-10-10T01:35:07.026 1: Dithering...
2018-10-10T01:35:07.027 9: Enter dithering wait loop,  FDithering=True terminated=False CancelAutofocus=False FStopGuiding=False
2018-10-10T01:35:07.146 2: Autoguider: Guiding Dithered
2018-10-10T01:35:08.270 2: Autoguider: Settling
2018-10-10T01:35:20.288 2: Autoguider: Guiding
2018-10-10T01:35:20.296 9: Exit dithering wait loop,  FDithering=False terminated=False CancelAutofocus=False FStopGuiding=False
2018-10-10T01:35:21.311 1: Starting Light exposure 5 for 240 seconds
2018-10-10T01:39:32.043 1: Saved file /home/starhopper/CCD/lgs3/Light/lgs3_L_53_240s_20181009_233931.fits
2018-10-10T01:39:36.898 1: Dithering...
2018-10-10T01:39:36.898 9: Enter dithering wait loop,  FDithering=True terminated=False CancelAutofocus=False FStopGuiding=False
2018-10-10T01:39:37.022 2: Autoguider: Guiding Dithered
2018-10-10T01:39:38.247 2: Autoguider: Settling
2018-10-10T01:39:45.767 2: Autoguider: Guiding
2018-10-10T01:39:45.781 9: Exit dithering wait loop,  FDithering=False terminated=False CancelAutofocus=False FStopGuiding=False
2018-10-10T01:39:46.803 1: Starting Light exposure 6 for 240 seconds
2018-10-10T01:43:57.497 1: Saved file /home/starhopper/CCD/lgs3/Light/lgs3_L_53_240s_20181009_234357.fits
2018-10-10T01:44:02.345 1: Autofocus now
2018-10-10T01:44:02.348 2: Stay at the current position for autofocus
2018-10-10T01:44:02.348 2: Pause autoguider
2018-10-10T01:44:02.657 2: Autoguider: Paused
2018-10-10T01:44:04.404 2: Focuser temperature: 20.0
2018-10-10T01:44:04.405 3: ZWO CCD ASI183MM Pro: Set binning 2x2
2018-10-10T01:44:04.624 3: Take control exposure for 2.0 seconds
2018-10-10T06:07:36.350 3: ZWO CCD ASI183MM Pro: Abort exposure
2018-10-10T06:07:36.351 2: Abort exposure
2018-10-10T06:07:36.353 1: Abort the current sequence
2018-10-10T06:07:36.355 1: Request to stop autofocus ...
2018-10-10T06:07:36.355 3: ZWO CCD ASI183MM Pro: Abort exposure
2018-10-10T06:07:36.355 3: ZWO CCD ASI183MM Pro: Abort exposure
2018-10-10T06:07:36.355 2: Abort exposure
2018-10-10T06:07:36.355 2: Stop capture
2018-10-10T06:07:36.357 2: Stop autoguider
2018-10-10T06:07:36.478 2: Autoguider: Stopped
2018-10-10T06:07:36.491 0: Sequence aborted.
2018-10-10T06:07:36.493 1: Executing the termination error actions.
2018-10-10T06:07:36.495 1: No termination actions configured.
2018-10-10T06:07:36.495 1: Disconnecting devices ...
2018-10-10T06:07:36.495 3: ZWO CCD ASI183MM Pro: Abort exposure
2018-10-10T06:07:36.612 0: ASI EFW: Server Disconnected
2018-10-10T06:07:36.613 0: ZWO CCD ASI183MM Pro: Server Disconnected
2018-10-10T06:07:36.615 0: MoonLite: Server Disconnected
2018-10-10T06:07:36.730 2: Autoguider: Exposures Stopped
2018-10-10T06:07:36.843 1: Plan LRGB4m stopped.
2018-10-10T06:07:36.843 1: Sequence lgs3 stopped.
2018-10-10T06:07:38.614 1: Configuration saved