View Issue Details

IDProjectCategoryView StatusLast Update
0002011CCdcielGeneralpublic18-11-05 21:00
ReporterThomas Jaeger Assigned ToPatrick Chevalley  
PriorityimmediateSeverityblockReproducibilityhave not tried
Status resolvedResolutionfixed 
Product Version0.9 
Target Version1.0 
Summary0002011: Cannot select plan or made plan any more
DescriptionI made a sequence for flats similar to this in the attachment. I saved it. I started the sequence and the error (in attachment) occurs. After that time I was unable to select or made a sequence plan any more. I can use the dropdown to select one, but it is not displayed below.

made a new sequence -> no change
restart ccdciel -> no change
restart computer -> no change

I was in trouble because the night is there. I deinstalled CCDCiel and installed 0.9.42-1158_amd64 which was stiil in my download folder. After that, it works. I saw 9.46.1211 is out. I this already fixed?


TagsNo tags attached.


Thomas Jaeger

18-11-05 18:05


Log_20181105_171158.log (2,377 bytes)   
2018-11-05T17:11:58.846  CCDciel Version beta 0.9.46-1211-4126558 2018/10/29 21:09:52
2018-11-05T17:11:58.846  Compiled with: Lazarus Free Pascal 3.0.4 Linux-x86_64-gtk2
2018-11-05T17:11:58.857 1: CCDciel Version beta 0.9.46-1211-4126558 initialized
2018-11-05T17:11:58.857 3: Using configuration file ccdciel_CA300-ASI183.conf
2018-11-05T17:12:16.198 2: Connecting Camera...
2018-11-05T17:12:16.212 2: Connecting Filter wheel...
2018-11-05T17:12:16.218 2: Connecting Focuser...
2018-11-05T17:12:19.515 1: Camera connected
2018-11-05T17:12:20.711 2: Camera frame x=0 y=0 width=5496 height=3672
2018-11-05T17:12:20.713 2: Camera cooler : True
2018-11-05T17:12:21.668 3: ZWO CCD ASI183MM Pro: Set temperature ramp to -20.0 started
2018-11-05T17:12:23.816 1: ZWO CCD ASI183MM Pro: Temperature ramp requested to stop
2018-11-05T17:12:25.474 1: Filter wheel connected
2018-11-05T17:12:25.908 1: Focuser connected
2018-11-05T17:12:27.731 0: ZWO CCD ASI183MM Pro: Temperature ramp canceled
2018-11-05T17:12:27.859 3: ZWO CCD ASI183MM Pro: Set temperature ramp to -20.0 started
2018-11-05T17:16:06.255 3: ZWO CCD ASI183MM Pro: Set temperature ramp finished
2018-11-05T17:16:06.390 3: ZWO CCD ASI183MM Pro: Set temperature ramp to -20.0 started
2018-11-05T17:16:06.390 3: ZWO CCD ASI183MM Pro: Set temperature ramp finished
2018-11-05T17:17:25.671 2: Set Binning 4x4
2018-11-05T17:17:25.672 3: ZWO CCD ASI183MM Pro: Set binning 4x4
2018-11-05T17:17:25.902 2: Start single preview
2018-11-05T17:17:30.371 2: End preview
2018-11-05T17:21:34.131 2: Start single preview
2018-11-05T17:21:38.327 2: End preview
2018-11-05T17:21:43.918 2: Start single preview
2018-11-05T17:21:46.224 2: End preview
2018-11-05T17:22:13.816 1: Cannot connect to CdC, Is CdC running and the server active?
2018-11-05T17:22:13.820 1: Connection refused
2018-11-05T17:22:13.824 1: Planetarium: Cartes du Ciel disconnected
2018-11-05T17:22:14.482 1: Autoguider: Connecting
2018-11-05T17:22:14.495 2: Autoguider: Stopped
2018-11-05T17:26:35.568 3: ZWO CCD ASI183MM Pro: Abort exposure
2018-11-05T17:26:35.681 0: ZWO CCD ASI183MM Pro: Server Disconnected
2018-11-05T17:26:35.682 0: MoonLite: Server Disconnected
2018-11-05T17:26:35.683 0: ASI EFW: Server Disconnected
2018-11-05T17:26:44.513 1: Disconnecting devices ...
2018-11-05T17:26:44.517 1: Configuration saved
2018-11-05T17:26:47.155 1: Program exit
Log_20181105_171158.log (2,377 bytes)   

Patrick Chevalley

18-11-05 19:08

administrator   ~0005042

This is probably related to this issue 0002006 when only one target is present in the list.
But the effect was less important in this case so I not make a new version immediately.

A new version 0.9.47 with this fix is now available.
You can continue the night with 0.9.42. When you have the time just tell me if 0.9.47 fix the issue.

Thomas Jaeger

18-11-05 20:48

reporter   ~0005043

Between RGB and Narrowband I installed 0.9.47 with success. Now I can access my plan again.

Patrick Chevalley

18-11-05 21:00

administrator   ~0005044

Thank you Thomas, and sorry for the annoyance.

Issue History

Date Modified Username Field Change
18-11-05 18:05 Thomas Jaeger New Issue
18-11-05 18:05 Thomas Jaeger File Added: Log_20181105_171158.log
18-11-05 18:05 Thomas Jaeger File Added: Bildschirmfoto vom 2018-11-05 17-41-13.png
18-11-05 18:05 Thomas Jaeger File Added: Bildschirmfoto vom 2018-11-05 17-25-49.png
18-11-05 19:08 Patrick Chevalley Assigned To => Patrick Chevalley
18-11-05 19:08 Patrick Chevalley Status new => feedback
18-11-05 19:08 Patrick Chevalley Target Version => 1.0
18-11-05 19:08 Patrick Chevalley Note Added: 0005042
18-11-05 20:48 Thomas Jaeger Note Added: 0005043
18-11-05 20:48 Thomas Jaeger Status feedback => assigned
18-11-05 21:00 Patrick Chevalley Status assigned => resolved
18-11-05 21:00 Patrick Chevalley Resolution open => fixed
18-11-05 21:00 Patrick Chevalley Note Added: 0005044