View Issue Details

IDProjectCategoryView StatusLast Update
0002117CCdciel[All Projects] Generalpublic19-04-24 18:48
ReporterArieAssigned ToPatrick Chevalley 
PrioritynormalSeverityfeatureReproducibilityalways
Status resolvedResolutionfixed 
PlatformPCOSWindowsOS Version10 64bit
Product Version 
Target Version1.0Fixed in Version 
Summary0002117: Option to connect/disconnect camera only
DescriptionIt would be useful if the camera only could be connected.
For doing a quick testshot or preview.
Also to access the camera ascom driver, to change settings there, without the need to disconnect everything.
TagsNo tags attached.

Activities

Patrick Chevalley

19-04-18 17:26

administrator   ~0005601

I can add this for each configured ASCOM device in the Edit menu, the same there is already "NDI Settings".
This must be active only if there is no sequence, preview, auto-focus running. If the device is connected it need a confirmation prompt to disconnect, then reconnect after the setup dialog is closed.

Patrick Chevalley

19-04-24 18:47

administrator   ~0005612

This is implemented by:
https://github.com/pchev/ccdciel/commit/c64e08689582917f02f4434ad2e446f376dc2b87

Issue History

Date Modified Username Field Change
19-04-18 02:07 Arie New Issue
19-04-18 17:26 Patrick Chevalley Assigned To => Patrick Chevalley
19-04-18 17:26 Patrick Chevalley Status new => assigned
19-04-18 17:26 Patrick Chevalley Target Version => 1.0
19-04-18 17:26 Patrick Chevalley Note Added: 0005601
19-04-24 18:47 Patrick Chevalley Note Added: 0005612
19-04-24 18:48 Patrick Chevalley Status assigned => resolved
19-04-24 18:48 Patrick Chevalley Resolution open => fixed