View Issue Details
ID | Project | Category | View Status | Date Submitted | Last Update |
---|---|---|---|---|---|
0002202 | CCdciel | General | public | 19-10-03 12:01 | 19-10-03 18:11 |
Reporter | han | Assigned To | Patrick Chevalley | ||
Priority | normal | Severity | minor | Reproducibility | always |
Status | resolved | Resolution | fixed | ||
Target Version | 1.0 | ||||
Summary | 0002202: Making flats while mount is switched off. | ||||
Description | A local member had problem making flats. The problem was cause by having the mount switched off. Preview images where allowed but when starting making the flats the exposure started and then nothing happened. So camera and guide camera where green and mount was red (not connected). The problem was easy solved by disabling the mount in device setup or to switch the mount on. Suggest to improve reporting (error can't making images while mount is not connected!) or allowing imaging if mount is disconnected to avoid confusion. | ||||
Tags | No tags attached. | ||||
|
Normally in this case it stop the capture and show a message. But this was broken when I separate the requirement checking in another procedure, part of the change to start the next exposure before to save the previous one. This is fixed by: https://github.com/pchev/ccdciel/commit/8229ab9a3ddec2d551b6eea660558313ffea5a03 |
Date Modified | Username | Field | Change |
---|---|---|---|
19-10-03 12:01 | han | New Issue | |
19-10-03 18:11 | Patrick Chevalley | Assigned To | => Patrick Chevalley |
19-10-03 18:11 | Patrick Chevalley | Status | new => resolved |
19-10-03 18:11 | Patrick Chevalley | Resolution | open => fixed |
19-10-03 18:11 | Patrick Chevalley | Target Version | => 1.0 |
19-10-03 18:11 | Patrick Chevalley | Note Added: 0005985 |