View Issue Details

IDProjectCategoryView StatusLast Update
0002213SkyChart1-Softwarepublic19-10-17 19:45
ReporterLinuxUser Assigned ToPatrick Chevalley  
PriorityhighSeveritycrashReproducibilityalways
Status assignedResolutionopen 
PlatformTinkerboardOSArmbian Ubuntu NAFABox 
Product Version4.1 SVN 
Target Version5.0 
Summary0002213: Skychart Version 4.2 "Access Violation" message box when connecting to INDI Telescope
DescriptionRun Skychart with the INDIstarter app active and connected to INDI (setup for Telescope, CCD, and Focus simulators in this case) and with the "Observer tools" Toolbox opened. When I then try to "Connect" the telescope a message box pops up with the following message "Access violation. Press OK to ignore and risk data corruption. Press Abort to kill the program." Pressing OK does nothing (tried several times) so pressing "Abort" will shut down the Skychart program which is the only way out.
Steps To ReproduceStart Skychart (Cartes du Ciel)
Start INDIstarter and connect to the INDI server
Open the "Observer tools" (Use F1 or the "View" - "Toolbox" - "Observer tools" menu)
Click the "Connect telescope" icon in the Skychart toolbar (or use the "Telescope" menu)
In the INDI driver window that pops up click the "Connect" button on the lower left
At this point the message box pops up and the only way out it to click "Abort" thereby closing Skychart (basically a crash).
TagsNo tags attached.

Relationships

duplicate of 0002132 assignedPatrick Chevalley CdC crashes on Raspberry Pi after turning on Observer Tools tool box 

Activities

LinuxUser

19-10-17 19:14

reporter   ~0006016

I was able to reproduce this on a Raspberry Pi 4 4GB running Raspian OS using the same steps as outlined above. The Tinkerboard and Raspberry Pi were also updated to all the latest updates from "apt-get update" and "apt-get upgrade".

Patrick Chevalley

19-10-17 19:20

administrator   ~0006017

This is a know problem with the toolbox script on the ARM processor that as no solution for now, see 0002132

The best is to not use this tools with this processor.
Use the "Connect Telescope" button in the main bar without the "Observer tools" and it work.

LinuxUser

19-10-17 19:45

reporter   ~0006018

Thank you Patrick for the followup and information. I had not seen that. This is unfortunate as I was wanting to use the "Observer tools" as a way to be able to move the telescope with the button interface. When I try to use the move buttons in the INDI panel my AP900 mount will not move (perhaps another bug it seems?). I use the Astrophysics Experimental driver. At one point while trying to move the scope with these buttons in INDI I had a high speed run away and was thankful I was able to disconnect the telescope power just in time to avoid a pier crash. In KStars/Ekos it all works fine.
I am trying to use the Skychart/CCDCiel software for semi unattended imaging. These are wonderful programs and thank you for all your hard work!

Issue History

Date Modified Username Field Change
19-10-17 19:05 LinuxUser New Issue
19-10-17 19:14 Patrick Chevalley Relationship added duplicate of 0002132
19-10-17 19:14 LinuxUser Note Added: 0006016
19-10-17 19:20 Patrick Chevalley Assigned To => Patrick Chevalley
19-10-17 19:20 Patrick Chevalley Status new => assigned
19-10-17 19:20 Patrick Chevalley Target Version => 5.0
19-10-17 19:20 Patrick Chevalley Note Added: 0006017
19-10-17 19:45 LinuxUser Note Added: 0006018