View Issue Details

IDProjectCategoryView StatusLast Update
0001588SkyChart1-Softwarepublic17-01-19 11:56
ReporterSasa Assigned ToPatrick Chevalley  
PrioritynormalSeverityminorReproducibilityalways
Status resolvedResolutionfixed 
PlatformLinux 32-bitOSKubuntuOS Version16.04
Product Version3.11 SVN 
Target Version4.0Fixed in Version3.11 SVN 
Summary0001588: Show constellation lines ON/OFF - apparently no change
DescriptionDefault settings after deleting .skychart dir

Clicking on "Show constellation lines" ON/OFF there is no apparently change on screen when several constellations are in visible range. I assume this should draw lines between main constellation stars and display recognizable shapes (Orion for instance)
TagsNo tags attached.

Activities

Patrick Chevalley

16-12-10 17:20

administrator   ~0003485

Yes, and for me this work without problem.
But beware the default constellation line color is dark-blue and maybe not very visible depending your screen setting.

Sasa

16-12-10 19:05

reporter   ~0003495

Yes, that is the reason. Can you change default color to white, yellow or any appropriate to be seen good on black or daylight blue?

I watching now cdc main web page and that seems to me for Orion is white with dotted lines.

Patrick Chevalley

16-12-10 20:23

administrator   ~0003496

Yes I can change the default for something more visible.
What do you thing of : R=80 G=128 B=0

The image on the web page is very outdated, this is not dotted line but aliasing on a low resolution screen, probably 640x480 I use at the time.
Version 4.0 is a good reason to replace this image.

But you can use dotted constellation line from Setup/Display/Lines, this render best if you activate anti-alias.

Sasa

16-12-10 21:13

reporter   ~0003497

Last edited: 16-12-10 21:55

Thank you. Anything can be seen clearly is fine with me.

Should I add similar issue for boundaries as well? Magenta like default color is as well hard to see on sky blue.

Sasa

17-01-18 23:17

reporter   ~0003550

BTW, this is trivial and default color could be changes quite quickly for 4.0 release.

Patrick Chevalley

17-01-19 11:56

administrator   ~0003553

Sure, was an error to set 4.2 here.

I change the default to R=80 G=128 B=0 for the lines and R=128 G=80 B=0 for the boundary.

https://sourceforge.net/p/skychart/code/3447/

Issue History

Date Modified Username Field Change
16-12-10 10:30 Sasa New Issue
16-12-10 17:20 Patrick Chevalley Note Added: 0003485
16-12-10 17:20 Patrick Chevalley Assigned To => Patrick Chevalley
16-12-10 17:20 Patrick Chevalley Status new => feedback
16-12-10 19:05 Sasa Note Added: 0003495
16-12-10 19:05 Sasa Status feedback => assigned
16-12-10 20:23 Patrick Chevalley Note Added: 0003496
16-12-10 21:13 Sasa Note Added: 0003497
16-12-10 21:55 Sasa Note Edited: 0003497
17-01-15 17:55 Patrick Chevalley Target Version => 4.2
17-01-18 23:17 Sasa Note Added: 0003550
17-01-19 11:56 Patrick Chevalley Status assigned => resolved
17-01-19 11:56 Patrick Chevalley Resolution open => fixed
17-01-19 11:56 Patrick Chevalley Fixed in Version => 3.11 SVN
17-01-19 11:56 Patrick Chevalley Target Version 4.2 => 4.0
17-01-19 11:56 Patrick Chevalley Note Added: 0003553