0000524: Feature requests for finder circles and squares

ID	Project	Category	View Status	Date Submitted	Last Update

0000524	SkyChart	1-Software	public	09-07-20 04:23	10-10-30 10:11

Reporter	crw4096	Assigned To	Patrick Chevalley
Priority	normal	Severity	feature	Reproducibility	N/A
Status	closed	Resolution	fixed
Platform	All	OS	All	OS Version	All
Product Version	3.0.1.6
Target Version	3.2	Fixed in Version	3.1 SVN

Summary	0000524: Feature requests for finder circles and squares
Description	Copied from Yahoo groups: One that I use a lot is the finder reticles for eyepieces and cameras. I have a good number of them configured, activated depending on the optical configuration. One thing that is tedious though is getting to the config window. This is rather cumbersome: "Setup->Display" then scroll the tabs over to the far right to select the correct tab. Doesn't sound like much, but in the dark, with gloves on, or needing to put the reading glasses back on to see things... Would it be possible to add a toolbar button to access both of these directly? Also, another problem I have is remembering which circle/rectangle is which. When using a main scope/guide scope setup, it's helpful to have a CCD finder for the main camera and for the guide scope, plus alternative CCD finder for different focal lengths (with/without reducer, etc). Plus eyepiece circles. Even pared down to a minimum, I currently have five of them enabled. Perhaps a right-click on the outline itself to show a small pop-up with the text entered in the config pane?
Tags	No tags attached.

Date Modified	Username	Field	Change
09-07-20 04:23	crw4096	New Issue
10-03-01 11:07	Patrick Chevalley	Target Version	0.3.0 => 3.2
10-07-18 10:31	Patrick Chevalley	Note Added: 0001161
10-07-18 10:31	Patrick Chevalley	Assigned To	=> Patrick Chevalley
10-07-18 10:31	Patrick Chevalley	Status	new => resolved
10-07-18 10:31	Patrick Chevalley	Resolution	open => fixed
10-07-18 10:31	Patrick Chevalley	Fixed in Version	0.3.0 => 3.1 SVN
10-10-30 10:11	Patrick Chevalley	Status	resolved => closed

Patrick Chevalley 10-07-18 10:31 administrator ~0001161	With the last snapshot version you can right click on the "Show mark" button to directly access the setting. Right click is also available for most button of the "object bar" to access their setting. There is now a "show label" checkbox at the bottom of the finder setting to add a label for each circle or rectangle.